MAXDoors Archives - MaxDoor-USA

What If Your Overhead Doors Always Operated at Peak Performance?

Here are specific vertical lift fabric MAXDoor models that will enhance the daily operation at your plant or manufacturing facility. We custom design and build the specific model that coincides with your particular door requirements. All doors are available with high wind load or high positive/negative pressure resistance. Several door speeds are available on each model from standard speed of 10-12 inches per second up to high speed doors in speeds up to 36” per second. Our standard PVC door fabric is 20 to 22 ounce and has a temperature range of -35 degrees to 150 degrees Fahrenheit. In addition, alternate fabrics are available for high temperature, low temperature, sound reduction, insulation (R-12), anti-static, transparent (frosted), security cut proof, rubber, insect screen and windows.

Model WD – The Warehouse Door

The Model WD door is a cost effective alternative to rolling steel doors.
Made for grade level truck size door openings and smaller. If you need a tough door to deal with traffic, high winds, dirty or corrosive environments, this door checks all the boxes.
Heavy-duty gearhead operator has a floor level manual chain hoist to allow door operation when power is not available.
Easy to install with the curtain assembly, lifting belts and motor operator being attached to the head member direct from the factory.

Model SD – The Standard Duty Door

The Model SD door is also a very cost effective alternative to a rolling steel door.
One tough door with a simple design to ensure long service life and minimal operation and maintenance costs.
The SD is furnished with an industrial grade NEMA-4 control panel with fused lockable rotary disconnect and the door is controlled by PLC Logic.
Model SD is designed for larger openings or where higher wind load is required.

Model UL – The Under Lintel Model

This door allows to be mounted under lintel and between jambs, or face of wall mount on the interior or exterior of the building.
Side frame steel or wide flange beams that the head member gets attached to can be provided by the customer or by MAXDoor. This results in significant savings when the customer or contractor furnishes and installs this steel.
The UL model is available in every door size that MAXDoor manufacturers large and small.

Model HD – The Heavy Duty Door

The Model HD door is an excellent alternative to rolling steel doors that require continual maintenance.
Designed for door openings that require a supporting frame and head member in addition to extra large openings.
The HD model is mounted face of wall on the interior or exterior of the opening allowing the full opening to be accessed.
The HD is available with high wind load or positive/negative pressure resistance. Just like the other models, this door can withstand a harsh environment and has no springs or counterweights.
This door can be used at crane door openings or for custom doors with very wide or very high openings.

Get The Right Door for Your Application

Contact us today or call 248-915-5838 to talk with our experts about how to craft the right vertical lift fabric door for your application.

Go With A MAXDoor Solution For Your Cleanroom

Doors for cleanrooms are a crucial aspect to the design of specially built environments. A cleanroom is a “room within” with an engineered space that maintains a very low concentration of air borne particulates. These rooms are constructed and operated in a manner to control the introduction, generation, and retention of particles inside the room. These rooms are well controlled for containment and actively cleaned to provide the cleanest area possible. Securing the right curtain/door in this situation is critical to the overall operation of a cleanroom.

The Best Industrial Doors for Cleanrooms

MAXDoor offers a wide range of reliable curtains and doors for cleanroom spaces.

The one-piece curtain minimizes air infiltration when the door is closed.
The curtain overlaps the door guide by approximately 2” on each side of the door resulting in dual side seals.
The dual layer fabric also minimizes air infiltration.
There are no door hinge points to allow air infiltration.
There are no sections of joints in the panel – the door is a solid seal.
If a cleanroom is under positive pressure, the air pressure creates a tighter seal at the door guides.
Alternate fabric choices are available for various types of special environments.

MAXDoor Industry Applications

MAXDoor provides curtains and doors for cleanrooms in all types of industries:

Pharmaceutical & Nutraceuticals
Laboratories & Research Facilities
Hospital & Healthcare Facilities
Food Industries
Biotech
Medical Cannabis
Sustainable Energy Supplies
E-Liquid Vape
Aerospace

MAXDoors are durable, strong, safe, and easy to operate. Our curtains and doors are the perfect solution to maintain the quality of a cleanroom.

Made in the USA

MAXDoors are made right here in the USA. If you would like to explore how a MAXDoor can make an impact at your facility contact us or call 877-436-0302.

Lock In Your Price New for a MAXDoor When You Order Today!

The cost of everything continues to rise and supply shortages are ongoing. Material costs are expected to rise this year so secure a locked in price now! You can save money in 2023 by ordering at today’s prices and securing the purchase of a MAXDoor with a minimal down payment.

Avoid Back-Logs and Delays

The industrial door industry also suffers from a back-log and shortage of components. If you purchase today and lock in the price, you know that in 3-4 months you will have a new vertical life fabric door – a MAXDoor.

Avoid Future Cost Increases

Our MAXDoors are made from vinyl material and vinyl is made from petroleum. The oil industry is up and down and securing your MAXDoor price today is a smart move. Any material not made in the USA is tied up in delayed shipping, and component manufacturers are not storing inventory. These manufacturers are building per order, and this increases lead time. In addition, labor shortages are impacting everything.

Lock In Your MAXDoor Price

This is all you need to do to lock in current MAXDoor pricing:

Call or email MAXDoor and tell us your door requirements
Our engineers will answer your questions and give you the best door solution to meet your needs
You will receive a quote and additional specific door information
Lock in current pricing with a down payment
Expect door delivery in 3-4 months or sooner

Get Started Today

MAXDoor Offers Faster Delivery and Longer Service Life

Long lead times for commercial overhead doors is a major problem. When you need to open or close a door, it is crucial to all operations of a business that the right door is installed at the door opening. Choosing a vertical lift fabric MAXDoor can provide you with a much shorter delivery time compared to rolling steel doors. There are many factors contributing to longer lead times such as lack of raw materials (steel), offshore suppliers unable to unload at the docks, and a shortage of employees in the manufacturing and delivery business.

MAXDoor understands the struggles everyone is currently facing especially in the industrial door business. However, we are based in Michigan where all our design and manufacturing take place. We can build and deliver a door much faster because we are a Made in the USA company designing and manufacturing doors in the state of Michigan. Our doors can be shipped anywhere in the U.S. and overseas. Because we have this advantage, we can deliver our product much faster than other door companies who rely on materials from foreign parts and overseas production.

Overhead Door Replacement

Replace your overhead door with a vertical lift fabric MAXDoor. Remember, for example, rolling steel doors are the cheapest door you can buy, and right now you will wait months to get one delivered. Instead look to MAXDoor and install a door that is high quality, 2-5 times stronger than most doors and has a life span of 20-25 years of dependability.

Experience Matters

With 35 years plus in the door business, we can design and custom build a door to fit your specific door opening needs. MAXDoors hold up in the most demanding of environments and can be designed and built for a maintained windload of up to 150 m.p.h.

Get The Right Type of Door

You want to make sure you order the right type of door for a specific door opening. Many doors will fit but you need to decide the type of internal and external environments you are dealing with and the severity of the surrounding environment. That’s where our door experts can come to the rescue. Reach out to a MAXDoor expert, talk to our design engineer and get a quality door that fits all of your overhead door needs.

Get The MAXDoor Advantage

You get it all with a MAXDoor:

Strength for High Wind Resistance
High speed opening and closing
High cycle capability

Get Help Today

Learn more about how MAXDoors can help increase the efficiency and safety at your facility when you talk to one of our design engineers today!

It’s a Great Time to Visit MAXDoor-USA.com!

Direct Line to a MAXDoor Expert: 248-915-5838

Dan@MAXDoor-usa.com

Sales@MAXDoor-usa.com

Nothing matches the strength to resist the wind or absorb collision impacts like a MAXdoor. This vertical lift fabric door can be custom designed to fit door openings up to 100 feet. The strength of a MAXDoor is 2-5 times stronger when compared to a rolling steel door. Our door offers a variety of features and is rated above industry standards.

MAXDoors are designed for high cycle operations and are a perfect fit for applications requiring hundreds of cycles per day. Providing the highest wind load resistance, our door is designed with a dual layer fabric panel and traveling horizontal beams. The dual layer fabric design also makes the MAXDoor much more energy efficient.

Door collisions become a minor issue with a MAXDoor. With no belts, components or devices to get trapped inside the door guides, MAXDoor is an easy fix when collisions occur. The fabric door panel horizontal beams are designed to flex and give way. Simply place the beams back inside the door guides and MAXDoor is operational resulting in no downtime or costly repair bills.

MAXDoor experts are available to address your industrial door needs. If you want to achieve MAXimum strength and MAXimum cost savings, install a MAXDoor – the made in the USA Vertical Lift Fabric Door for industrial and commercial door openings.

A Maintenance Free Solution

Maintaining an industrial door can be costly. With a vertical lift fabric door, MAXDoor, your cash output for repairs will be eliminated. In addition, MAXDoor has a service life of 20-25 years. In the long run, a maintenance free door equals savings to you and your bottom line.

On your basic steel rollup door, there is a list of items that constantly need repaired or replaced: lift cables, bearings, rollers, hinges, coil cords, weather seal, door guides. Not only will you pay the cost for materials buy you will also pay the high cost of labor. In addition, when your door is down, your business no longer works efficiently, and you lose money. Repairs and downtime are a very expensive, ongoing expenditure.

Purchasing a MAXDoor saves you money and let’s explain why:

High Wind Capacity – the door tolerates high winds, barely moves, and this eliminates door damage and door repair. In addition, you benefit by having more floor space in your building because there is no billowing of the door or door curtain eating up valuable floor area. MAXDoor can be custom designed and built for a maintained wind load of up to 150 mph.
The way a MAXDoor operates is key to repair cost savings. The door operates like a roman shade allowing the weight and wind load to be transferred from the traveling door panel into the guides at every horizontal beam. All traveling beams are designed to flex and give way upon impact. The beams are easily put back into the door guides resulting in zero repair costs.
MAXDoor provides maximum strength. The door panel is built with 4”, 6” or 12” thick double-layer fabric. The fabric overlaps the door guides to provide a weather-tight seal and maintains a high wind load. MAXDoors are self- supporting and do not put additional load on the building. Our doors can be installed on the interior and exterior side of a wall.
With the right industrial door in place – MAXDoor – you can reduce energy costs by 50%. Running a business means doors open and close allowing materials and supplies to enter and exit your facility. Having the best door in place for your needs can offer tremendous savings. MAXDoor recently conducted an evaluation of a facility using a door 16FT tall and 16FT wide. To get the results of this amazing study (and you will be shocked), contact us at sales@maxdoor-usa.com or call 248-915-5838 and ask for a MAXDoor representative.
MAXDoor offers an option to allow sunlight into your facility with the optional use of a translucent fabric. The fabric allows more sunlight/daylight into your building. Not only is your facility brighter with natural light, the sunlight also provides warmth especially in those cold winter months. Allowing sunlight/daylight through your industrial door equals savings on your lighting and heating bill.

If your warehouse, facility, factory, or workshop could benefit by having a maintenance free industrial door that reduces your energy bills, contact sales@maxdoor-usa.com. We are here to answer all of your questions and custom design a MAXDoor that meets all of your needs.

Customize a MAXDoor With Your Logo Or Creative Artwork

A Picture is Worth a Thousand Words

Customize your MAXDoor with a logo, symbol, words or design. MAXDoor has developed a unique way to attach your logo or creative artwork to the vertical lift fabric MAXDoor. This is a great feature that can be added at minimal cost. One of the first visual signs a delivery person, customer or employee will see is your logo or important identifying words on your fabric MAXDoor. The way MAXDoor is designed provides the perfect opportunity to customize identification labels for each door. Here are 5 good reasons why labeling your door is a smart move:

Visual signage or labeling on a door is easily recognizable and communicates the brand company logo. Regardless of the language someone speaks, logos and labels communicate universally. A logo is one of the first things you notice about a business. Our memories work by remembering images first and names second. Very simply put, the primary purpose of a logo or label is to identify. Having your company logo on your industrial door turns that door into an advertising tool.

Labeling the doors at your facility can provide a big advantage to delivery people who frequent your facility. When you think of the number of carriers delivering goods to warehouses, factories, airports, mines, aerospace and government facilities, you realize how easily items can be delivered to the wrong location. You want the right delivery unloaded at the right door. If doors are correctly labeled it makes this process so much easier and makes for an efficient receiving operation. Labeling doors with numbers, letters or words can make daily operations flow much smoother and can be critical for locating a door if an emergency occurs.

Doors play a significant part in people’s safety. A labeled door can easily identify what is behind it. Words such as Caution, Danger, Hazardous, Clean Room, Warning will alert a person as to what dangers may lurk if that door is opened.

Logo’s and labels are critical to emergency responders. Accidents happen and you want to make sure emergency personnel and your own employees are well aware of the contents being stored behind each door at your facility. This could greatly reduce the amount of damage to your facility and limited harm to your employees.

Regulatory compliance is another reason to strongly consider the labeling of doors. Organizations such as OSHA often require proper industrial labeling of areas containing hazardous materials.

MAXDoor is owned and operated in the USA, has a 2 Year Warranty, minimal repair costs and readily available components. With over 25 years of experience in the door business, let our experts assist you with designing a custom door to fit your specific needs. Ask a question or request a quote from sales@maxdoor-usa.com or contact us directly at 248-658-1900.

Best Industrial Door for Waste Handling Facilities

MAXDoor provides vertical lift fabric doors for companies in the Waste Handling, Hazardous Waste, and Recycling Industries. Typically, these facilities are using overhead rolling steel doors. This type of door is the least expensive door you can purchase initially, and over time it is more likely to need expensive repairs or total replacement.

Doors at waste disposal facilities experience a lot of maintenance and downtime caused by the environment and accidental collisions. Government regulations require the doors be kept operational and closed during normal operation and not doing so can result in expensive fines. You can eliminate these fines/costs and minimize door downtime by investing in a MAXDoor.

Reasons to make MAXDoor your next purchase for your waste handling facility:

Minimum load on your building structure
Fabric provides excellent chemical resistance
High positive and negative wind resistance
Low maintenance due to design and high-quality components
MAXDoors operate at high speed
MAXDoors are built to run 24 hours a day and 7 days a week
Up to 5 times stronger than rolling steel doors
MAXDoors can be manufactured for any size door opening
20-25 Year service life

BONUS – MAXDoors Are 100% Recyclable!

MAXDoor is here to answer all your questions and our expert door specialists will provide you with the best door solutions for your waste handling facility. Ask a question or request a quote from sales@MAXDoor-usa.com or call us at 248-915-5838.

The Many Ways a MAXDoor Can Save You Money

Learn in the video below the many ways that a MAXDoor vertical lift fabric door can save money at your facility.

Best Vertical Lift Fabric Door for Agriculture and Fertilizer Industries

MAXDoor Provides a Self-Supporting Vertical Lift Fabric Door for the Agriculture and Fertilizer Industries

American farming is vital to everyday life and protecting your products, equipment and machinery is vital to your agricultural operations. MAXDoors are custom built to keep everything in your buildings secure and safe.

Designed for heavy industrial environments, MAXDoor offers the SD Model for openings up to 30-ft wide x 30-ft high and the Model HD for larger door openings. Our doors have the following features:

MAXDoors are 2-5 times stronger than rolling steel doors
MAXDoors operate at high speed (Up to 60” per second)
MAXDoors are designed for high cycle applications (hundreds/day)
MAXDoors are less expensive than roll up fabric, rubber, rolling steel & steel vertical lift doors
MAXDoors are an ideal EPA and Quality Control solution for truck vestibules
MAXDoors are designed for all environments including explosion proof

MAXDoors are designed to function in tough, dirty environments. The 4”- 6” thick fabric door panel is free to break away should a collision occur. Our simple design puts minimum load on the building structure and substantially reduces annual operating and maintenance costs. MAXDoor provides:

Excellent environment separation
Satisfies EPA requirements for bird and rodent control
High positive and negative wind resistance
20-25 Year Service Life

Owned and operated in the USA, MAXDoor has a 2-Year warranty, minimal repair costs and readily available components resulting in reduced annual operating and maintenance costs for our customers.